Please wait while the page loads...

Check Engine Light Service 2020 Toyota 4Runner

What do you do when you’re driving along in your Toyota 4Runner and promptly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a tiny because you have tiny idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2020 Toyota 4Runner checked as soon as potential. Ignoring that warning could end up causing heavy damage to pricey engine components.

When your 2020 Toyota 4Runner's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electrical control system that it can’t good, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an computerized probe tool that is used by our Toyota auto repair mechanics at Bill Estes Toyota. There are also a number of comparatively economical code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an competent experienced to edge the issue and repair it.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy subsequently. If you check engine light is flashing, we recommend that you pull over and contact Bill Estes Toyota to aid indicate if your vehicle is safe to drive in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is hard to predict how many miles you can drive with the warning light on. It could be anything from a harmful sensor to plug wires needing to be replaced.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is ordinarily between $88 and $111. The essential news, Bill Estes Toyota offers complimentary multi-point inspections and free diagnostics, in most cases, to help designate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not subsequently tightened to a more perilous failure like a detrimental catalytic converter or a problem with one of the car's oxygen sensors, so it essential to get the legal code reading and diagnosis.

What could cause the check engine light to come on in a 2020 Toyota 4Runner?

When your check engine light comes on, this could be as authentic as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a active problem that could cause active damage to your engine and come with a generous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow typically means something less active but a blinking check engine light hints that your vehicle’s engine is in active trouble and service is essential immediately. If your check engine light is blinking in your 2020 Toyota 4Runner, we exceedingly recommend not to drive the vehicle and schedule Toyota service today. Below is a list of the most prudent reasons your check engine light can come on:

  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota 4Runner is what determines how much fuel is mandatory to run your engine efficiently by measuring the reward of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Toyota 4Runner is having trouble starting, idling rough or has a rapid change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • One of the most established and many cause is that your 2020 Toyota 4Runner gas cap is loose, damaged or missing. The gas cap for your 2020 Toyota 4Runner serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is historic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't pricey. If your check engine light turns on suddenly after you put gas in your 2020 Toyota 4Runner, initial thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2020 Toyota 4Runner if it’s not installed properly. These aftermarket components and accessories can eject the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound pure, bring your 4Runner to Toyota and have our squad of certified technicians ensure that your aftermarket items were installed properly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM components initial place might cost a meager bit more but could save you money from having to get low perform and damage caused by low installation perform corrected.
  • Your 2020 Toyota 4Runner has a vacuum leak. Every Toyota 4Runner has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to extraordinary heat or extreme brisk.
  • The battery is low or dead. The battery in your 2020 Toyota 4Runner is every paramount. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did assorted decades ago, and they don't surely require maintenance. The price of a new one depends on the type of Toyota you drive, but check our current service coupons and specials.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the reward of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be fewer favorable when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2020 Toyota 4Runner's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the polite mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2020 Toyota 4Runner’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is commonly caused by neglected maintenance, which is why Bill Estes Toyota offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it serviced, your 2020 Toyota 4Runner will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.
  • New Spark Plugs or Plug Wires are mandatory for your 2020 Toyota 4Runner. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires transport the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or historic, you will experience low performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, big to more pricey repairs.

2020 Toyota 4Runner Check Engine Light

A flashing light indicates that the problem is unhealthy and if not taken care of shortly may result in huge damage to the vehicle. If the check engine light in your 2020 Toyota 4Runner starts flashing, that means that the problem needs immediate attention and your Toyota should be brought in shortly. This shining light frequently indicates a serious engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can expeditiously raise the temperature of the catalytic converter to a point where damage is potential, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can really be the cause. A harmful, aged or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a excessively expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Bill Estes Toyota quickly by calling 3174346990.

2020 Toyota 4Runner Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that scant light on your vehicle’s dashboard quickly illuminates, but in reality, it is not something that should cause you to shut down in fear good away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your 4Runner. There are hundreds of assorted codes that your check engine light can determine. While that sounds daunting, with a scant patience, tackling meaningful diagnostics will give you practical knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, engaging and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of available OBD codes, there are also hundreds of available reasons for the light, including:

  • Transmission issues
  • Emissions controls issues
  • Fuel and air metering systems problems
  • Loose Gas Cap or Missing Gas Cap
  • O2 Sensor
  • Old Battery
  • Computer output circuit issues
  • Ignition system faults
  • Bad Spark Plugs

This is why it is critical for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out expeditiously by a certified Toyota mechanic. If the engine light comes on due to a threatening concern, you risk damaging your car further by not repairing the issue decent away. Call Bill Estes Toyota at 3174346990 today or schedule your check engine light service online today!

Will the check engine light reset itself?

The check engine light on your 2020 Toyota 4Runner will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going feasible, and you did a few of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2020 Toyota 4Runner light will go off after about 20-40 miles. If you drive over that sum and the light is still on, you will need to bring it in to Bill Estes Toyota so the light and code can be double-checked and reset.

2020 Toyota 4Runner Check Engine Light Flashing

Although there are countless conceivable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several essential causes including something as easy as a loose gas cap. Other essential reasons for a Check Engine Light are damaged oxygen sensor, faulty head gasket, dirty mass airflow sensor, faulty emissions control part, a malfunction with the fuel injection system, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as imperative to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was fixed.

Every 2020 Toyota 4Runner was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its critical systems. The sensors are continually detecting conditions while sending data to the electronic control team. If the electronic control team detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what totally is wrong nor what to do about it. That’s where we come in; Bill Estes Toyota provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Particularly Qualified Service trained.

Is it safe to drive your 2020 Toyota 4Runner with the check engine light on?

If the check engine light is flashing, this means that there is a effective issue and it is recommended to service your Toyota 4Runner urgently. This question is not very pure because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is usually indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more efficient problem. Call the veterans at Bill Estes Toyota by dialing 3174346990 so you can describe the issues. Or reduce your speed and bring your 2020 Toyota to our certified mechanics as soon as potential.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2020 Toyota 4Runner is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few specific ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light flashes in either an amber or red color and is part of the diagnostics system found on your automobile. Onboard computers increasingly have controlled and monitored automobile performance since the 80s and do a collection of things for your 2020 Toyota 4Runner. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can mean a range of diverse things. It can be as uncomplicated as your gas cap being loose or as combative as engine knocking. If your check engine light is on in your 2020 Toyota 4Runner, contact Bill Estes Toyota. Our Toyota service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing. Contact Bill Estes Toyota today!