Please wait while the page loads...

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is hard to predict how many miles you can drive with the warning light on. If you check engine light is flashing, we advise that you pull over and contact Bill Estes Toyota to help indicate if your vehicle is safe to drive in or if we advise a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a harmful sensor to plug wires needing to be interchanged.

2016 Toyota Tacoma Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that scant light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear honorable away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also conscious as the OBD (on-board computer diagnostic system) in your Tacoma. There are hundreds of different codes that your check engine light can determine. While that sounds daunting, with a scant patience, tackling vital diagnostics will give you nice knowledge about your vehicle and will also allow that Check Engine Light to do what it is surely supposed to do: be your guide. Unfortunately, noticeable and satisfactory vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of available OBD codes, there are also hundreds of available reasons for the light, including:

  • Transmission issues
  • Old Battery
  • Loose Gas Cap or Missing Gas Cap
  • Computer output circuit issues
  • Emissions controls issues
  • Bad Spark Plugs
  • Ignition system faults
  • Fuel and air metering systems problems
  • O2 Sensor

This is why it is meaningful for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Bill Estes Toyota at 3174346990 immediately or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out expeditiously by a certified Toyota mechanic. If the engine light comes on due to a effective concern, you risk bad your car further by not repairing the issue right away.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is typically between $88 and $111. The marvelous news, Bill Estes Toyota offers complimentary multi-point inspections and free diagnostics, in most cases, to help mean the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not accurately tightened to a more strict failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it marvelous to get the correct code reading and diagnosis.

What Does the Check Engine Light Mean?

One of the most typically misunderstood lights or indicators in your 2016 Toyota Tacoma is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in assorted discrete ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2016 Toyota Tacoma. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of back-up things. It can be as plain as your gas cap being loose or as strict as engine knocking. If your check engine light is on in your 2016 Toyota Tacoma, contact Bill Estes Toyota. Contact Bill Estes Toyota today! Our Toyota service department can help you read what code is turning your check engine light on or diagnose why your check engine light is flashing.

2016 Toyota Tacoma Check Engine Light Flashing

Although there are many conceivable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several commonplace causes comprising something as straightforward as a loose gas cap. Distinctive commonplace reasons for a Check Engine Light are damaged oxygen sensor, dirty mass airflow sensor, a malfunction with the fuel injection system, faulty head gasket, faulty emissions control part, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Mechanics and the certified service protocol to isolate the root problem and repair it as decisive to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was fixed.

Every 2016 Toyota Tacoma was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the automobile on its basic systems. The sensors are continually detecting conditions while sending data to the computerized control unit. If the computerized control unit detects that the data is out of factory specifications, the Check Engine Light brightens telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what explicitly is remorseful nor what to do about it. That’s where we come in; Bill Estes Toyota provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service expert.

Is it safe to drive your 2016 Toyota Tacoma with the check engine light on?

This question is not very familiar because it any depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is continuously indicated by a consistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more relentless problem. If the check engine light is flashing, this means that there is a relentless issue and it is recommended to service your Toyota Tacoma suddenly. Call the experts at Bill Estes Toyota by dialing 3174346990 so you can describe the issues. Or lower your speed and bring your 2016 Toyota to our certified mechanics as soon as achievable.

Check Engine Light Service 2016 Toyota Tacoma

What do you do when you’re driving along in your Toyota Tacoma and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a small because you have small idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the estimate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Toyota Tacoma checked as soon as functional. Ignoring that warning could end up causing dramatic damage to pricey engine components.

When your 2016 Toyota Tacoma's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the computerized control system that it can’t miniature, a computer turns on your check engine light. This amber or yellow light is consistently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic investigate tool that is used by our Toyota auto repair mechanics at Bill Estes Toyota. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you edge that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an professional professional to mean the issue and repair it.

What could cause the check engine light to come on in a 2016 Toyota Tacoma?

When your check engine light comes on, this could be as coherent as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a frightful problem that could cause frightful damage to your engine and come with a central repair bill. Depending on your make and model, the check engine light will illuminate or blink. A persistent glow ordinarily means something less frightful but a flashing check engine light indicates that your vehicle’s engine is in frightful trouble and service is crucial today. If your check engine light is flashing in your 2016 Toyota Tacoma, we highly recommend not to drive the vehicle and schedule Toyota service promptly. Below is a list of the most accepted reasons your check engine light can come on:

  • Issues with any aftermarket items. An aftermarket alarm, exhaust or extra item can wreak havoc on your 2016 Toyota Tacoma if it’s not installed accurately. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even avoid the vehicle from starting. If these issues sound effortless, bring your Tacoma to Toyota and have our department of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing any issue. Getting accessories, extraordinarily aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your 2016 Toyota Tacoma has a vacuum leak. Every Toyota Tacoma has a vacuum system that performs a wide variety of functions. The vacuum system also helps decrease damaging emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can arid out and crack, extraordinarily if they’re exposed to extraordinary heat or extreme cold.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less functional when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Toyota Tacoma's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to illustrate the prudent mixture of air and fuel that enters the cylinders in your engine. A damaging O2 sensor can also cause a car to fail an emissions test.
  • Your catalytic converter is damaging or going damaging. The catalytic converter is a part of your 2016 Toyota Tacoma’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is commonly caused by neglected maintenance, which is why Bill Estes Toyota offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2016 Toyota Tacoma will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause extra problems from overheating.
  • New Spark Plugs or Plug Wires are decisive for your 2016 Toyota Tacoma. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are damaging or erstwhile, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, dominant to more expensive repairs.
  • The battery is low or dead. The battery in your 2016 Toyota Tacoma is every extraordinary. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Toyota you drive, but check our current service coupons and specials.
  • One of the most effortless and copious cause is that your 2016 Toyota Tacoma gas cap is loose, damaged or missing. The gas cap for your 2016 Toyota Tacoma serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a damaging fuel cap? If your gas cap is erstwhile or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on quickly after you put gas in your 2016 Toyota Tacoma, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Tacoma is what determines how much fuel is decisive to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to confident changes, like altitude. If your Toyota Tacoma is having trouble starting, idling rough or has a brisk change in the position of the throttle pedal, this could be a sign of a damaging mass airflow sensor.

2016 Toyota Tacoma Check Engine Light

A flashing light indicates that the problem is scrupulous and if not taken care of expeditiously may result in broad damage to the vehicle. If the check engine light in your 2016 Toyota Tacoma starts flashing, that means that the problem needs immediate attention and your Toyota should be brought in expeditiously. This glaring light usually indicates a dangerous engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can hastily increase the temperature of the catalytic converter to a point where damage is likely, requiring an costly repair. Some owners ask if spark plugs cause the check engine light to flash? This can totally be the cause. A damaging, aged or dirty spark plug can cause the engine to misfire. If your check engine light is twinkling, please contact our team of automotive experts at Bill Estes Toyota abruptly by calling 3174346990. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very costly repair.

Will the check engine light reset itself?

The check engine light on your 2016 Toyota Tacoma will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Toyota Tacoma light will go off after about 20-40 miles. If you travel to work over that amount and the light is still on, you will need to bring it in to Bill Estes Toyota so the light and code can be double-checked and reset.