Please wait while the page loads...

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we recommend that you pull over and contact Bill Estes Toyota to aid select if your vehicle is safe to drive in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is hard to predict how innumerable miles you can drive with the warning light on. It could be anything from a harmful sensor to plug wires needing to be replaced.

Will the check engine light reset itself?

The check engine light on your 2014 Toyota 4Runner will commonly shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did bountiful of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Toyota 4Runner light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Bill Estes Toyota so the light and code can be double-checked and reset.

Check Engine Light Service 2014 Toyota 4Runner

What do you do when you’re driving along in your Toyota 4Runner and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the price of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t indicate you have to pull the vehicle over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Toyota 4Runner checked as soon as conceivable. Ignoring that warning could end up causing dominant damage to expensive engine parts.

When your 2014 Toyota 4Runner's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t equitable, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is designate with an computerized scan tool that is used by our Toyota auto repair mechanics at Bill Estes Toyota. There are also a number of relatively impartial code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an competent experienced to find out the issue and repair it.

Is it safe to drive your 2014 Toyota 4Runner with the check engine light on?

This question is not very conclusive because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be able to drive. This is generally indicated by a persistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more alarming problem. If the check engine light is flashing, this means that there is a alarming issue and it is recommended to service your Toyota 4Runner shortly. Call the experts at Bill Estes Toyota by dialing 3174346990 so you can describe the issues. Or reduce your speed and deliver your 2014 Toyota to our certified mechanics as soon as possible.

2014 Toyota 4Runner Check Engine Light

If the check engine light in your 2014 Toyota 4Runner starts flashing, that means that the problem needs sudden attention and your Toyota should be brought in immediately. A flashing light indicates that the problem is dangerous and if not taken care of immediately may result in great damage to the vehicle. This blinking light frequently illustrates a strict engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can hastily raise the temperature of the catalytic converter to a point where damage is conceivable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can actually be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very fancy repair. If your check engine light is glaring, please contact our company of automotive veterans at Bill Estes Toyota abruptly by calling 3174346990.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is frequently between $88 and $111. The tremendous news, Bill Estes Toyota offers complimentary multi-point inspections and free diagnostics, in most cases, to help pick the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more serious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it tremendous to get the fair code reading and diagnosis.

2014 Toyota 4Runner Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear justifiable away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also common as the OBD (on-board computer diagnostic system) in your 4Runner. There are hundreds of distinctive codes that your check engine light can imply. While that sounds daunting, with a little patience, tackling primary diagnostics will give you essential knowledge about your vehicle and will also allow that Check Engine Light to do what it is absolutely supposed to do: be your guide. Regrettably, added and essential vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of conceivable OBD codes, there are also hundreds of conceivable reasons for the light, including:

  • Bad Spark Plugs
  • Fuel and air metering systems problems
  • O2 Sensor
  • Transmission issues
  • Ignition system faults
  • Old Battery
  • Computer output circuit issues
  • Emissions controls issues
  • Loose Gas Cap or Missing Gas Cap

This is why it is satisfying for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Bill Estes Toyota at 3174346990 immediately or schedule your check engine light service online today! If the engine light comes on due to a strict concern, you risk damaging your car further by not repairing the issue good away. When your check engine light comes on, you should get it checked out immediately by a certified Toyota mechanic.

2014 Toyota 4Runner Check Engine Light Flashing

Although there are countless feasible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are innumerable innate causes including something as plain as a loose gas cap. Other innate reasons for a Check Engine Light are dirty mass airflow sensor, faulty emissions control part, damaged oxygen sensor, faulty head gasket, a malfunction with the fuel injection system, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was fixed.

Every 2014 Toyota 4Runner was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its important systems. The sensors are usually detecting conditions while sending data to the electrical control unit. If the electrical control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what explicitly is wrong nor what to do about it. That’s where we come in; Bill Estes Toyota provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service experienced.

What could cause the check engine light to come on in a 2014 Toyota 4Runner?

When your check engine light comes on, this could be as cogent as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a unhealthy problem that could cause unhealthy damage to your engine and come with a active repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow customarily means something less unhealthy but a flashing check engine light indicates that your vehicle’s engine is in unhealthy trouble and service is basic immediately. If your check engine light is flashing in your 2014 Toyota 4Runner, we immensely recommend not to travel to work the vehicle and schedule Toyota service today. Below is a list of the most commonplace reasons your check engine light can come on:

  • The battery is poor or dead. The battery in your 2014 Toyota 4Runner is every interesting. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Toyota you drive, but check our extant service coupons and specials.
  • Your 2014 Toyota 4Runner has a vacuum leak. Every Toyota 4Runner has a vacuum system that performs a expansive variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, particularly if they’re exposed to adequate heat or extreme brisk.
  • Issues with each aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2014 Toyota 4Runner if it’s not installed well. These aftermarket elements and accessories can discard the battery, trigger the check engine light, or even avert the vehicle from starting. If these issues sound current, bring your 4Runner to Toyota and have our team of certified mechanics ensure that your aftermarket items were installed properly and aren't causing each issue. Getting accessories, particularly aftermarket parts and accessories, or using OEM elements earliest place might price a little bit more but could save you money from having to get poor perform and damage caused by poor installation perform corrected.
  • New Spark Plugs or Plug Wires are needed for your 2014 Toyota 4Runner. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires bring the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or common, you will experience poor performance and reduced power. In a few extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, principal to more expensive repairs.
  • Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your 2014 Toyota 4Runner’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is ordinarily caused by neglected maintenance, which is why Bill Estes Toyota offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 Toyota 4Runner will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause other problems from overheating.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less realistic when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2014 Toyota 4Runner's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to designate the decent mixture of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a vehicle to fail an emissions test.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota 4Runner is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to keen changes, like altitude. If your Toyota 4Runner is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.
  • One of the most normal and frequent cause is that your 2014 Toyota 4Runner gas cap is loose, damaged or missing. The gas cap for your 2014 Toyota 4Runner serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is common or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on expeditiously after you put gas in your 2014 Toyota 4Runner, earliest thing you should check is to make convinced the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.

What Does the Check Engine Light Mean?

One of the most ordinarily misunderstood lights or indicators in your 2014 Toyota 4Runner is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a collection of things for your 2014 Toyota 4Runner. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can mean a assortment of different things. It can be as effortless as your gas cap being loose or as risky as engine knocking. If your check engine light is on in your 2014 Toyota 4Runner, contact Bill Estes Toyota. Contact Bill Estes Toyota today! Our Toyota service department can help you find out what code is turning your check engine light on or investigate why your check engine light is flashing.