Please wait while the page loads...

What Does the Check Engine Light Mean?

One of the most usually misunderstood lights or indicators in your 2013 Toyota RAV4 is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in various diverse ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Toyota RAV4. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can pick a range of particular things. It can be as simple as your gas cap being loose or as precarious as engine knocking. If your check engine light is on in your 2013 Toyota RAV4, contact Bill Estes Toyota. Our Toyota service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is glaring. Contact Bill Estes Toyota today!

Check Engine Light Service 2013 Toyota RAV4

What do you do when you’re driving along in your Toyota RAV4 and quickly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a slight because you have slight idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the estimate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t imply you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Toyota RAV4 checked as soon as feasible. Ignoring that warning could end up causing major damage to expensive engine elements.

When your 2013 Toyota RAV4's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the computerized control system that it can’t functional, a computer turns on your check engine light. This amber or yellow light is consistently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an high-tech scan tool that is used by our Toyota auto repair mechanics at Bill Estes Toyota. There are also a number of comparably feasible code readers that are designed for do-it-yourselfers, should you opt for that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an trained technical to indicate the issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2013 Toyota RAV4 will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going accessible, and you did several of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Toyota RAV4 light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Bill Estes Toyota so the light and code can be double-checked and reset.

2013 Toyota RAV4 Check Engine Light

If the check engine light in your 2013 Toyota RAV4 starts twinkling, that means that the problem needs hasty attention and your Toyota should be brought in straightaway. A twinkling light expresses that the problem is strict and if not taken care of straightaway may result in dominant damage to the vehicle. This blinking light commonly indicates a strict engine misfire allowing unburned fuel to be discharged into the exhaust system. There it can suddenly enhance the temperature of the catalytic converter to a point where damage is possible, requiring an costly repair. Some owners ask if spark plugs cause the check engine light to flash? This can explicitly be the cause. A detrimental, long-established or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our team of automotive consultants at Bill Estes Toyota urgently by calling 3174346990.

How many miles can you drive with the check engine light?

Since every check engine code has its own level of severity, it is troublesome to predict how many miles you can drive with the warning light on. It could be anything from a bad sensor to plug wires needing to be replenished. The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we advocate that you pull over and contact Bill Estes Toyota to help indicate if your vehicle is safe to drive in or if we advocate a tow truck.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more unhealthy failure like a damaging catalytic converter or a problem with one of the car's oxygen sensors, so it favorable to get the beneficial code reading and diagnosis. The average cost for a check engine light diagnosis & testing is typically between $88 and $111. The favorable news, Bill Estes Toyota offers complimentary multi-point inspections and free diagnostics, in most cases, to help determine the cause of your check engine light.

Is it safe to drive your 2013 Toyota RAV4 with the check engine light on?

If the check engine light is flashing, this means that there is a critical issue and it is recommended to service your Toyota RAV4 rapidly. This question is not very typical because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be firm to commute. This is typically indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more instinctive problem. Call the experts at Bill Estes Toyota by dialing 3174346990 so you can describe the issues. Or reduce your speed and bring your 2013 Toyota to our certified mechanics as soon as careful.

2013 Toyota RAV4 Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are disparate principal causes including something as real as a loose gas cap. Other principal reasons for a Check Engine Light are faulty head gasket, faulty emissions control part, a malfunction with the fuel injection system, dirty mass airflow sensor, damaged oxygen sensor, or defective spark plugs to name some. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as crucial to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was fixed.

Every 2013 Toyota RAV4 was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are continually detecting conditions while sending data to the electrical control unit. If the electrical control unit detects that the data is out of factory specifications, the Check Engine Light flashes telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what totally is mistaken nor what to do about it. That’s where we come in; Bill Estes Toyota provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service technological.

2013 Toyota RAV4 Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that slight light on your vehicle’s dashboard promptly illuminates, but in reality, it is not something that should cause you to shut down in fear reasonable away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also established as the OBD (on-board computer diagnostic system) in your RAV4. There are hundreds of diversified codes that your check engine light can represent. While that sounds daunting, with a slight patience, tackling main diagnostics will give you convenient knowledge about your car and will also allow that Check Engine Light to do what it is certainly supposed to do: be your guide. Unfortunately, clear-cut and helpful car symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of alive OBD codes, there are also hundreds of alive reasons for the light, including:

  • Computer output circuit issues
  • Loose Gas Cap or Missing Gas Cap
  • Old Battery
  • Emissions controls issues
  • Fuel and air metering systems problems
  • O2 Sensor
  • Bad Spark Plugs
  • Ignition system faults
  • Transmission issues

This is why it is obvious for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a dangerous concern, you risk damaging your car further by not repairing the issue proper away. When your check engine light comes on, you should get it checked out quickly by a certified Toyota mechanic. Call Bill Estes Toyota at 3174346990 today or schedule your check engine light service online today!

What could cause the check engine light to come on in a 2013 Toyota RAV4?

When your check engine light comes on, this could be as straightforward as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a innovative problem that could cause innovative damage to your engine and come with a colossal repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow typically means something less innovative but a glaring check engine light indicates that your vehicle’s engine is in innovative trouble and service is decisive suddenly. If your check engine light is glaring in your 2013 Toyota RAV4, we hugely recommend not to drive the car and schedule Toyota service today. Below is a list of the most current reasons your check engine light can come on:

  • Your 2013 Toyota RAV4 has a vacuum leak. Every Toyota RAV4 has a vacuum system that performs a wide variety of functions. The vacuum system also helps cut down harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, chiefly if they’re exposed to startling heat or extreme immediate.
  • The battery is low or dead. The battery in your 2013 Toyota RAV4 is every relevant. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did some decades ago, and they don't genuinely require maintenance. The price of a new one depends on the type of Toyota you commute, but check our existing service coupons and specials.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2013 Toyota RAV4 if it’s not installed perfectly. These aftermarket parts and accessories can ditch the battery, trigger the check engine light, or even stop the vehicle from starting. If these issues sound natural, bring your RAV4 to Toyota and have our squad of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing any issue. Getting accessories, chiefly aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get scanty work and damage caused by scanty installation work corrected.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota RAV4 is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to conclusive changes, like altitude. If your Toyota RAV4 is having trouble starting, idling rough or has a abrupt change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • New Spark Plugs or Plug Wires are needed for your 2013 Toyota RAV4. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires bring the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience scanty performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, first-rate to more expensive repairs.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 Toyota RAV4’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Bill Estes Toyota offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Toyota RAV4 will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause other problems from overheating.
  • One of the most commonplace and many cause is that your 2013 Toyota RAV4 gas cap is loose, damaged or missing. The gas cap for your 2013 Toyota RAV4 serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on abruptly after you put gas in your 2013 Toyota RAV4, first thing you should check is to make courageous the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, natural as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less steady when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Toyota RAV4's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the noble mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a vehicle to fail an emissions test.