Please wait while the page loads...

2013 Toyota Camry Check Engine Light

A twinkling light illustrates that the problem is dangerous and if not taken care of shortly may result in giant damage to the vehicle. If the check engine light in your 2013 Toyota Camry starts twinkling, that means that the problem needs immediate attention and your Toyota should be transported in shortly. This blinking light generally indicates a strict engine misfire allowing unburned fuel to be deposited into the exhaust system. There it can expeditiously hike the temperature of the catalytic converter to a point where damage is likely, requiring an fancy repair. Some owners ask if spark plugs cause the check engine light to flash? This can absolutely be the cause. A damaging, former or dirty spark plug can cause the engine to misfire. If your check engine light is shining, please contact our team of automotive experts at Bill Estes Toyota shortly by calling 3174346990. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a extraordinarily expensive repair.

Check Engine Light Service 2013 Toyota Camry

What do you do when you’re driving along in your Toyota Camry and immediately, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t represent you have to pull the automobile over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Toyota Camry checked as soon as handy. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2013 Toyota Camry's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t noble, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic diagnose tool that is used by our Toyota auto repair mechanics at Bill Estes Toyota. There are also a number of relatively economical code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an licensed experienced to express the issue and repair it.

What Does the Check Engine Light Mean?

One of the most normally misunderstood lights or indicators in your 2013 Toyota Camry is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few contrasting ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Toyota Camry. Some of these include shifting automatic transmissions ignition timing, controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of different things. It can be as pragmatic as your gas cap being loose or as applicable as engine knocking. If your check engine light is on in your 2013 Toyota Camry, contact Bill Estes Toyota. Contact Bill Estes Toyota today! Our Toyota service department can help you prefer what code is turning your check engine light on or audit why your check engine light is twinkling.

2013 Toyota Camry Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear polite away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also familiar as the OBD (on-board computer diagnostic system) in your Camry. There are hundreds of countless codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling primary diagnostics will give you accessible knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, distinct and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of feasible OBD codes, there are also hundreds of feasible reasons for the light, including:

  • Computer output circuit issues
  • O2 Sensor
  • Fuel and air metering systems problems
  • Ignition system faults
  • Emissions controls issues
  • Transmission issues
  • Old Battery
  • Loose Gas Cap or Missing Gas Cap
  • Bad Spark Plugs

This is why it is convenient for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a relentless concern, you risk damaging your car further by not repairing the issue honorable away. When your check engine light comes on, you should get it checked out expeditiously by a certified Toyota mechanic. Call Bill Estes Toyota at 3174346990 today or schedule your check engine light service online today!

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more perilous failure like a damaging catalytic converter or a problem with one of the car's oxygen sensors, so it astonishing to get the agreeable code reading and diagnosis. The intermediate cost for a check engine light diagnosis & testing is continually between $88 and $111. The astonishing news, Bill Estes Toyota offers complimentary multi-point inspections and free diagnostics, in most cases, to assist convenience the cause of your check engine light.

Will the check engine light reset itself?

The check engine light on your 2013 Toyota Camry will frequently shut itself off if the issue or code that caused it to turn on is repaired. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Toyota Camry light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Bill Estes Toyota so the light and code can be double-checked and reset.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we advocate that you pull over and contact Bill Estes Toyota to help opt for if your car is safe to drive in or if we advocate a tow truck. The safest bet is to decipher the code and then plan your strategy subsequently. It could be anything from a harmful sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on.

What could cause the check engine light to come on in a 2013 Toyota Camry?

When your check engine light comes on, this could be as discernible as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a exceptional problem that could cause exceptional wear and tear to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow continuously means something less exceptional but a glaring check engine light indicates that your vehicle’s engine is in exceptional trouble and service is essential immediately. If your check engine light is glaring in your 2013 Toyota Camry, we highly endorse not to commute the vehicle and schedule Toyota service today. Below is a list of the most accepted reasons your check engine light can come on:

  • One of the most regular and frequent cause is that your 2013 Toyota Camry gas cap is loose, damaged or missing. The gas cap for your 2013 Toyota Camry serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a destructive fuel cap? If your gas cap is historic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on instantly after you put gas in your 2013 Toyota Camry, earliest thing you should check is to make positive the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less active when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Toyota Camry's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to designate the noble mixture of air and fuel that enters the cylinders in your engine. A destructive O2 sensor can also cause a vehicle to fail an emissions test.
  • The battery is low or dead. The battery in your 2013 Toyota Camry is every imposing. Without a vehicle battery, your vehicle won’t start, light up the road ahead, play the radio or charge your phone. Today’s vehicle batteries last much longer than they did a little decades ago, and they don't really require maintenance. The price of a new one depends on the type of Toyota you drive, but check our current service coupons and specials.
  • Your 2013 Toyota Camry has a vacuum leak. Every Toyota Camry has a vacuum system that performs a wide variety of functions. The vacuum system also helps lessen destructive emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dehydrated out and crack, chiefly if they’re exposed to active heat or extreme bitter.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota Camry is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to cognizant changes, like altitude. If your Toyota Camry is having trouble starting, idling rough or has a speedy change in the position of the throttle pedal, this could be a sign of a destructive mass airflow sensor.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or distinctive item can wreak havoc on your 2013 Toyota Camry if it’s not installed properly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prohibit the vehicle from starting. If these issues sound common, bring your Camry to Toyota and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, chiefly aftermarket parts and accessories, or using OEM parts earliest place might cost a slight bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • Your catalytic converter is destructive or going destructive. The catalytic converter is a part of your 2013 Toyota Camry’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Bill Estes Toyota offers a complimentary multi-point inspection with every Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Toyota Camry will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your vehicle may run at a higher temperature, too, which can cause distinctive problems from overheating.
  • New Spark Plugs or Plug Wires are needed for your 2013 Toyota Camry. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires bring the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are destructive or historic, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, large to more expensive repairs.

2013 Toyota Camry Check Engine Light Flashing

Although there are many ability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are a few common causes including something as detectable as a loose gas cap. Alternative common reasons for a Check Engine Light are dirty mass airflow sensor, a malfunction with the fuel injection system, damaged oxygen sensor, faulty emissions control part, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as mandatory to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was fixed.

Every 2013 Toyota Camry was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its colossal systems. The sensors are continually detecting conditions while sending data to the computerized control team. If the computerized control team detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is awry nor what to do about it. That’s where we come in; Bill Estes Toyota provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Hugely Qualified Service mechanical.

Is it safe to drive your 2013 Toyota Camry with the check engine light on?

If the check engine light is flashing, this means that there is a relentless issue and it is recommended to service your Toyota Camry suddenly. This question is not very pragmatic because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is naturally indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more relentless problem. Call the experts at Bill Estes Toyota by dialing 3174346990 so you can describe the issues. Or reduce your speed and bring your 2013 Toyota to our certified mechanics as soon as competent.