Please wait while the page loads...

How much does it cost to get the engine light checked?

The central value for a check engine light diagnosis & testing is commonly between $88 and $111. The dazzling news, Bill Estes Toyota offers complimentary multi-point inspections and free diagnostics, in most cases, to help pick the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more hazardous failure like a damaging catalytic converter or a problem with one of the car's oxygen sensors, so it dazzling to get the contented code reading and diagnosis.

What could cause the check engine light to come on in a 2013 Toyota 4Runner?

When your check engine light comes on, this could be as easy as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a unhealthy problem that could cause unhealthy damage to your engine and come with a unusual repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow frequently means something less unhealthy but a flashing check engine light expresses that your vehicle’s engine is in unhealthy trouble and service is needed hastily. If your check engine light is flashing in your 2013 Toyota 4Runner, we highly recommend not to drive the vehicle and schedule Toyota service today. Below is a list of the most usual reasons your check engine light can come on:

  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Toyota 4Runner is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to certain changes, like altitude. If your Toyota 4Runner is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a detrimental mass airflow sensor.
  • The battery is scanty or dead. The battery in your 2013 Toyota 4Runner is each humongous. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't genuinely require maintenance. The rate of a new one depends on the type of Toyota you drive, but check our advanced service coupons and specials.
  • Your catalytic converter is detrimental or going detrimental. The catalytic converter is a part of your 2013 Toyota 4Runner’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Bill Estes Toyota offers a complimentary multi-point inspection with each Toyota service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Toyota 4Runner will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause supplemental problems from overheating.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or supplemental item can wreak havoc on your 2013 Toyota 4Runner if it’s not installed subsequently. These aftermarket parts and accessories can ditch the battery, trigger the check engine light, or even prevent the automobile from starting. If these issues sound appreciative, transport your 4Runner to Toyota and have our team of certified mechanics ensure that your aftermarket items were installed well and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts authentic place might cost a bit bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
  • One of the most normal and many cause is that your 2013 Toyota 4Runner gas cap is loose, damaged or missing. The gas cap for your 2013 Toyota 4Runner serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a detrimental fuel cap? If your gas cap is traditional or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on instantly after you put gas in your 2013 Toyota 4Runner, authentic thing you should check is to make satisfied the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Your 2013 Toyota 4Runner has a vacuum leak. Each Toyota 4Runner has a vacuum system that performs a expansive variety of functions. The vacuum system also helps decrease detrimental emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to exciting heat or extreme impassioned.
  • New Spark Plugs or Plug Wires are needed for your 2013 Toyota 4Runner. The spark plugs are the part of your engine that ignites the air/fuel variety in the combustion chamber of your automobile. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are detrimental or traditional, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, finest to more expensive repairs.
  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, established as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your automobile will be less convenient when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Toyota 4Runner's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the polite variety of air and fuel that enters the cylinders in your engine. A detrimental O2 sensor can also cause a car to fail an emissions test.

Will the check engine light reset itself?

The check engine light on your 2013 Toyota 4Runner will constantly shut itself off if the issue or code that caused it to turn on is revamped. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going practical, and you did contrasting of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Toyota 4Runner light will go off after about 20-40 miles. If you drive over that fee and the light is still on, you will need to bring it in to Bill Estes Toyota so the light and code can be double-checked and reset.

2013 Toyota 4Runner Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard quickly flashes, but in reality, it is not something that should cause you to shut down in fear justifiable away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your 4Runner. There are hundreds of different codes that your check engine light can opt for. While that sounds daunting, with a little patience, tackling basic diagnostics will give you helpful knowledge about your vehicle and will also allow that Check Engine Light to do what it is genuinely supposed to do: be your guide. Unfortunately, clear and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of handy OBD codes, there are also hundreds of handy reasons for the light, including:

  • Bad Spark Plugs
  • Fuel and air metering systems problems
  • Transmission issues
  • O2 Sensor
  • Loose Gas Cap or Missing Gas Cap
  • Computer output circuit issues
  • Ignition system faults
  • Old Battery
  • Emissions controls issues

This is why it is big for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out immediately by a certified Toyota mechanic. If the engine light comes on due to a serious concern, you risk combative your car extra by not repairing the issue decent away. Call Bill Estes Toyota at 3174346990 now or schedule your check engine light service online today!

What Does the Check Engine Light Mean?

One of the most continuously misunderstood lights or indicators in your 2013 Toyota 4Runner is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few divergent ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Toyota 4Runner. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a lot. With that being said, the check engine light can represent a variety of disparate things. It can be as reasonable as your gas cap being loose or as hazardous as engine knocking. If your check engine light is on in your 2013 Toyota 4Runner, contact Bill Estes Toyota. Contact Bill Estes Toyota today! Our Toyota service department can help you learn what code is turning your check engine light on or observe why your check engine light is twinkling.

2013 Toyota 4Runner Check Engine Light

If the check engine light in your 2013 Toyota 4Runner starts blinking, that means that the problem needs immediate attention and your Toyota should be brought in immediately. A blinking light suggests that the problem is alarming and if not taken care of immediately may result in emotional damage to the car. This blinking light usually indicates a rigorous engine misfire allowing unburned fuel to be discarded into the exhaust system. There it can suddenly increase the temperature of the catalytic converter to a point where break is likely, requiring an costly repair. Some owners ask if spark plugs cause the check engine light to flash? This can entirely be the cause. A bad, historic or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very fancy repair. If your check engine light is flashing, please contact our team of automotive consultants at Bill Estes Toyota expeditiously by calling 3174346990.

2013 Toyota 4Runner Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are disparate modern causes including something as easy as a loose gas cap. Contrasting modern reasons for a Check Engine Light are a malfunction with the fuel injection system, damaged oxygen sensor, faulty head gasket, dirty mass airflow sensor, faulty emissions control part, or defective spark plugs to name a bit. No matter what is the root cause of the Check Engine Light, we have the Toyota Certified Technicians and the certified service protocol to isolate the root problem and repair it as fundamental to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Toyota issue was serviced.

Every 2013 Toyota 4Runner was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its difficult systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Bill Estes Toyota provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service professional.

Check Engine Light Service 2013 Toyota 4Runner

What do you do when you’re driving along in your Toyota 4Runner and rapidly, a yellow light brightens on your dash and says "Check Engine". If you’re like most Toyota owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the rate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Toyota 4Runner checked as soon as likely. Ignoring that warning could end up causing leading break to costly engine components.

When your 2013 Toyota 4Runner's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t decent, a computer turns on your check engine light. This amber or yellow light is continually labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic probe tool that is used by our Toyota auto repair mechanics at Bill Estes Toyota. There are also a number of relatively little code readers that are designed for do-it-yourselfers, should you indicate that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to indicate the issue and repair it.

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. If you check engine light is flashing, we recommend that you pull over and contact Bill Estes Toyota to assist represent if your automobile is secure to drive in or if we recommend a tow truck. It could be anything from a bad sensor to plug wires needing to be replenished.

Is it safe to drive your 2013 Toyota 4Runner with the check engine light on?

This question is not highly plain because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is customarily indicated by a steady glow of the check engine light. If you notice a difference in the performance of the automobile, it could be an indication of a more important problem. If the check engine light is blinking, this means that there is a important issue and it is recommended to service your Toyota 4Runner now. Call the experts at Bill Estes Toyota by dialing 3174346990 so you can describe the issues. Or lessen down your speed and bring your 2013 Toyota to our certified mechanics as soon as viable.